1. Ensure the system is in a stable state

   Make sure no one else is using it and nothing else important is going on. It's probably a good idea to stop service-providing units like httpd or ftpd, just to ensure external connections don't disrupt things in the middle.

   systemctl stop httpd
   systemctl stop nfs-server

   and so on....

   Make sure you have lsof installed (lsof -v). And that fuser (fuser -V) in installed too (Debian/Ubuntu package: psmisc).

   Unmount all unused filesystems

   umount -a

   This will print a number of 'Target is busy' warnings, for the root volume itself and for various temporary/system FSs. These can be ignored for the moment. What's important is that no on-disk filesystems remain mounted, except the root filesystem itself. Verify this:

   mount alone provides the info, but column makes it possible to read

   mount | column -t

   If you see any on-disk filesystems still mounted, then something is still running that shouldn't be. Check what it is using fuser:

   if necessary:

   yum install psmisc

   then:

   fuser -vm <mountpoint>
   systemctl stop <whatever>
   umount -a

   repeat as required...

   Make the temporary root Note: if /tmp is a directory on /, we will not be able to unmount / later in this procedure if we use /tmp/tmproot. Thus it may be necessary to use an alternative mountpoint such as /tmproot instead.

   mkdir /tmp/tmproot
   mount -t tmpfs none /tmp/tmproot
   mkdir /tmp/tmproot/{proc,sys,dev,run,usr,var,tmp,oldroot}
   cp -ax /{bin,etc,mnt,sbin,lib,lib64} /tmp/tmproot/
   cp -ax /usr/{bin,sbin,lib,lib64} /tmp/tmproot/usr/
   cp -ax /var/{account,empty,lib,local,lock,nis,opt,preserve,run,spool,tmp,yp} /tmp/tmproot/var/

   This creates a very minimal root system, which breaks (among other things) manpage viewing (no /usr/share), user-level customizations (no /root or /home) and so forth. This is intentional, as it constitutes encouragement not to stay in such a jury-rigged root system any longer than necessary.

   At this point you should also ensure that all the necessary software is installed, as it will also assuredly break the package manager. Glance through all the steps, and make sure you have the necessary executables.

   Pivot into the root

   mount --make-rprivate / # necessary for pivot_root to work
   pivot_root /tmp/tmproot /tmp/tmproot/oldroot
   for i in dev proc sys run; do mount --move /oldroot/$i /$i; done

   systemd causes mounts to allow subtree sharing by default (as with mount --make-shared), and this causes pivot_root to fail. Hence, we turn this off globally with mount --make-rprivate /. System and temporary filesystems are moved wholesale into the new root. This is necessary to make it work at all; the sockets for communication with systemd, among other things, live in /run, and so there's no way to make running processes close it.

   Ensure remote access survived the changeover

   systemctl restart sshd
   systemctl status sshd

   After restarting sshd, ensure that you can get in, by opening another terminal and connecting to the machine again via ssh. If you can't, fix the problem before moving on.

   Once you've verified you can connect in again, exit the shell you're currently using and reconnect. This allows the remaining forked sshd to exit and ensures the new one isn't holding /oldroot.

   Close everything still using the old root

   fuser -vm /oldroot

   This will print a list of processes still holding onto the old root directory. On my system, it looked like this:

             USER        PID ACCESS COMMAND

   /oldroot: root kernel mount /oldroot
   root 1 ...e. systemd
   root 549 ...e. systemd-journal
   root 563 ...e. lvmetad
   root 581 f..e. systemd-udevd
   root 700 F..e. auditd
   root 723 ...e. NetworkManager
   root 727 ...e. irqbalance
   root 730 F..e. tuned
   root 736 ...e. smartd
   root 737 F..e. rsyslogd
   root 741 ...e. abrtd
   chrony 742 ...e. chronyd
   root 743 ...e. abrt-watch-log
   libstoragemgmt 745 ...e. lsmd
   root 746 ...e. systemd-logind
   dbus 747 ...e. dbus-daemon
   root 753 ..ce. atd
   root 754 ...e. crond
   root 770 ...e. agetty
   polkitd 782 ...e. polkitd
   root 1682 F.ce. master
   postfix 1714 ..ce. qmgr
   postfix 12658 ..ce. pickup

   You need to deal with each one of these processes before you can unmount /oldroot. The brute-force approach is simply kill $PID for each, but this can break things. To do it more softly:

   systemctl | grep running

   This creates a list of running services. You should be able to correlate this with the list of processes holding /oldroot, then issue systemctl restart for each of them. Some services will refuse to come up in the temporary root and enter a failed state; these don't really matter for the moment.

   If the root drive you want to resize is an LVM drive, you may also need to restart some other running services, even if they do not show up in the list created by fuser -vm /oldroot. You might be unable to to resize an LVM drive under Step 7 because of this Error:

   fsadm: Cannot proceed with mounted filesystem "/oldroot"

   You can try systemctl restart systemd-udevd and if that fails, you can find the leftover mounts with grep system /proc/*/mounts | column -t

   Look for processes that say mounts:none and try restarting these:

   PATH BIN FSTYPE
   /proc/16395/mounts:tmpfs /run/systemd/timesync tmpfs
   /proc/16395/mounts:none /var/lib/systemd/timesync tmpfs
   /proc/18485/mounts:tmpfs /run/systemd/inhibit tmpfs
   /proc/18485/mounts:tmpfs /run/systemd/seats tmpfs
   /proc/18485/mounts:tmpfs /run/systemd/sessions tmpfs
   /proc/18485/mounts:tmpfs /run/systemd/shutdown tmpfs
   /proc/18485/mounts:tmpfs /run/systemd/users tmpfs
   /proc/18485/mounts:none /var/lib/systemd/linger tmpfs

   Some processes can't be dealt with via simple systemctl restart. For me these included auditd (which doesn't like to be killed via systemctl, and so just wanted a kill -15). These can be dealt with individually.

   The last process you'll find, usually, is systemd itself. For this, run systemctl daemon-reexec.

   Once you're done, the table should look like this:

             USER        PID ACCESS COMMAND

   /oldroot: root kernel mount /oldroot

   Unmount the old root

   umount /oldroot

   At this point, you can carry out whatever manipulations you require. The original question needed a simple resize2fs invocation, but you can do whatever you want here; one other use case is transferring the root filesystem from a simple partition to LVM/RAID/whatever.

   Pivot the root back

   mount <blockdev> /oldroot
   mount --make-rprivate / # again
   pivot_root /oldroot /oldroot/tmp/tmproot
   for i in dev proc sys run; do mount --move /tmp/tmproot/$i /$i; done

   This is a straightforward reversal of step 4.

   Dispose of the temporary root

   Repeat steps 5 and 6, except using /tmp/tmproot in place of /oldroot. Then:

   umount /tmp/tmproot
   rmdir /tmp/tmproot

   Since it's a tmpfs, at this point the temporary root dissolves into the ether, never to be seen again.

   Put things back in their places

   Mount filesystems again:

   mount -a

   At this point, you should also update /etc/fstab and grub.cfg in accordance with any adjustments you made during step 7.

   Restart any failed services:

   systemctl | grep failed
   systemctl restart <whatever>

   Allow shared subtrees again:

   mount --make-rshared /

   Start the stopped service units - you can use this single command:

   systemctl isolate default.target

And you're done.

struct UsersService {
    config: &'static Config,
}

struct OrdersService {
    config: &'static Config,
}

// ...

fn load() -> Result<&'static Config, Error> {
    // ...
    return Ok(Box::leak(Box::new(config)));
}

// ...

let config = config::load()?;

let users_service = UsersService::new(config);

let orders_service = OrdersService::new(config);

User space scheduling